Signify Ecolink 36W 6ft Single LED Batten 4300lm 4000K

Signify Ecolink 36W 6 ft Single LED Batten

The Signify Ecolink 36W 1800mm Single LED Batten provides bright, energy-efficient illumination for commercial, educational and light-industrial interiors. Producing 4300 lumens of clear 4000K cool white light, it is a practical replacement for traditional fluorescent battens in suitable indoor applications.

This single-output fitting combines an efficient integrated LED light source with a Philips-approved driver for stable everyday performance. Its slim 78mm-wide profile creates a clean, unobtrusive appearance, while the BESA fixing points help simplify installation onto a suitable ceiling or mounting surface.

With an output of approximately 120 lumens per watt, the Ecolink batten delivers effective illumination while using less energy than many older fluorescent alternatives. A rated life of up to 50,000 hours can also reduce the frequency of lamp changes and ongoing maintenance.

Key Features

• 36W integrated LED batten
• 6 ft 1800mm single-output design
• 3500-lumen light output
• 4000K cool white illumination
• Approximately 120 lumens per watt
• CRI 80 for clear colour appearance
• Philips-approved LED driver
• Slim 78mm-wide profile
• BESA fixing points for easier installation
• IP20 rating for dry indoor locations
• 220–240V mains operation
• Rated life of up to 50,000 hours
• Five-year manufacturer’s warranty

Suitable Applications

The Signify Ecolink LED Batten is suitable for a wide range of dry indoor environments, including:

• Offices and commercial premises
• Schools and educational buildings
• Retail areas and stockrooms
• Workshops and utility spaces
• Corridors and communal areas
• Garages and indoor storage areas
• Suitable warehouses and light-industrial premises

Single or Twin LED Batten?

The single version produces 4300 lumens. Its single-output design provides economical general illumination for corridors, offices, utility spaces, smaller work areas and installations where fittings will be positioned relatively close together.

Choose the required batten based on the room size, mounting height, spacing between fittings, and the illumination level needed for the activity taking place. A suitable lighting design should be developed to ensure specific workplace illumination levels are achieved.

Technical Information

This IP20 batten is intended for dry indoor locations. It should be installed by a suitably qualified person in accordance with the manufacturer’s instructions and applicable wiring regulations.