Durable LED Lighting from Signify Ecolink
Signify Ecolink LED non-corrosive fittings provide practical, energy-efficient illumination for areas exposed to dust, moisture or more demanding operating conditions. Their enclosed IP65 construction makes them a more protective alternative to standard open LED battens.
The range is suitable for applications including garages, workshops, warehouses, covered parking areas, industrial facilities and selected outdoor locations. Every fitting produces 4000K cool white illumination, creating a bright and practical environment for general visibility and everyday tasks.
With 4ft, 5ft and 6ft sizes available in single and twin-output versions, the range covers everything from a compact home workshop to a larger commercial installation.
Choose the Right Size and Output
The most suitable fitting will depend on the dimensions of the space, its mounting height and the amount of light required. Ecolink offers two output levels at every available length.
Length | Single version | Twin version | Typical applications |
4ft / 1200mm | 22W, 2400lm | 44W, 4800lm | Smaller garages, workshops, utility areas and storage rooms |
5ft / 1500mm | 31W, 3500lm | 53W, 6800lm | Medium workshops, covered parking areas and commercial workspaces |
6ft / 1800mm | 44W, 4300lm | 65W, 7800lm | Warehouses, industrial areas and larger garages or workshops |
These applications are general guidance. The correct number and positioning of fittings will also depend on the room layout, mounting surface and required lighting level.
Single or Twin Non-Corrosive Fittings?
A twin Ecolink fitting produces considerably more light than the corresponding single version. The terms follow the familiar single-tube and twin-tube fluorescent fittings that integrated LED products often replace.
Single versions may provide sufficient general illumination in smaller spaces or where several fittings will be installed evenly across an area. Twin versions are better suited to larger spaces, higher mounting positions and working environments requiring greater visibility.
Always compare lumen output rather than wattage alone. Wattage tells you how much electricity the fitting uses, whereas lumens indicate how much visible light it produces.
What Does IP65 Mean?
The Ecolink non-corrosive range is designed with IP65 protection. The first digit means the enclosure is dust-tight, while the second indicates protection against water jets from different directions.
This makes the fittings suitable for many environments where a standard IP20 batten would not provide enough protection, including:
- Garages affected by dust or condensation
- Workshops and industrial areas
- Warehouses and storage facilities
- Covered car parks
- Utility and maintenance areas
- Agricultural or similar working environments
- Suitable outdoor or covered exterior locations
IP65 does not mean that a fitting can be submerged in water. Suitability still depends on its position, the conditions at the installation site and correct fitting in accordance with the manufacturer’s instructions.
LED Batten or Non-Corrosive Fitting?
A standard LED batten is generally intended for clean, dry indoor environments. It can be a suitable choice for an office, dry stockroom, utility room or well-protected garage.
A non-corrosive fitting has an enclosed construction designed to provide increased protection against moisture and dust. It is therefore the better choice for more demanding garages, workshops, warehouses, covered parking areas and other locations where an open batten may be vulnerable.
Despite the familiar name, “non-corrosive” should not be interpreted as a guarantee that the fitting is unaffected by every chemical, coastal or highly corrosive environment. The precise site conditions should be assessed before installation.
Bright 4000K Cool White Light
All six Ecolink non-corrosive fittings produce 4000K cool white light. This provides a clean, practical appearance that works particularly well in garages, workshops, warehouses and industrial settings.
The clear illumination can make equipment, work surfaces, vehicles and potential obstacles easier to see. A stated colour rendering index of CRI 80 provides suitable everyday colour appearance for general domestic, trade and commercial tasks.
An Integrated LED Alternative to Fluorescent Fittings
Ecolink non-corrosive fittings use integrated LED technology, so separate fluorescent tubes and starters are not required. This creates a complete, energy-efficient fitting and reduces the maintenance associated with traditional fluorescent lighting.
The range delivers up to 129 lumens per watt and has a stated operating life of up to 50,000 hours. High-quality Philips-approved drivers and stainless-steel clips are also used to support dependable long-term performance.
Actual energy savings and service life will depend on the previous installation, operating hours, environmental conditions and correct installation.
Suitable for Domestic and Professional Applications
For domestic customers, an Ecolink non-corrosive fitting can provide practical lighting in a garage, workshop, outbuilding or covered working area where dust or moisture may be present.
For electricians, facilities managers and commercial customers, the broader range of lengths and outputs supports installations in warehouses, industrial premises, covered parking areas and other professional environments.
Several evenly positioned fittings may provide more consistent illumination than one very high-output unit, particularly in long, wide or unusually shaped spaces.
Optional Three-Hour Self-Test Emergency Pack
The category also includes a waterproof EM300V three-hour self-test emergency pack for compatible Ecolink fittings. When correctly installed, an emergency pack enables a suitable fitting to provide reduced illumination if the normal mains supply fails.
The self-test function performs scheduled checks automatically, helping reduce the manual testing burden in suitable commercial and communal installations. Compatibility with the selected non-corrosive fitting must be confirmed before ordering.
Emergency lighting should be designed, installed and maintained by a suitably qualified professional according to the building’s fire-risk assessment and applicable UK requirements.
The Lightsave Home Advantage
Lightsave Home combines competitive Ecolink pricing with support from an experienced UK lighting supplier. Whether you need one fitting for a home garage or a coordinated lighting solution for professional premises, the range offers practical choices across several sizes and outputs.
- 4ft, 5ft and 6ft fittings
- Single and higher-output twin versions
- Protective IP65 construction
- Bright 4000K cool white illumination
- Compatible self-test emergency option
- Five-year manufacturer’s warranty
- Convenient UK delivery
- Secure online ordering or collection from our Reading trade counter
If you need help selecting a size, output or emergency option, contact our lighting team for practical product advice.
