Bell LED HID & SON Replacement Lamps

Shop Bell LED HID and SON replacement lamps for metal halide and sodium upgrades. Efficient LED alternatives for commercial and exterior fittings.

View as Grid List

16 Items

Set Descending Direction
per page

Upgrade HID and SON Lamps to Bell LED

Bell LED HID and SON replacement lamps provide a practical route from older high-intensity discharge lighting to modern LED technology. They are intended for applications where existing sodium, metal halide or similar discharge lamps are reaching the end of their service life or consuming more energy than necessary.

These specialist lamps can be used in compatible commercial, industrial, amenity and exterior fittings. Choosing the correct replacement requires more than matching wattage alone, so the existing cap, physical dimensions, lumen output and installation requirements should all be checked carefully.

SON and Sodium Alternatives

LED alternatives can provide a clearer, more consistent light than traditional sodium lamps. Check the required lumen output and colour temperature as well as the original lamp wattage.

Metal Halide Replacements

Bell LED lamps can replace compatible metal halide products in suitable fittings, helping reduce energy use and ongoing relamping requirements.

Commercial Applications

Typical applications include warehouses, workshops, amenity areas and exterior fittings where high-output lighting and dependable performance are required.

What to Check Before Ordering

  • The cap type and lamp orientation
  • The available space inside the fitting
  • The required lumen output
  • The preferred colour temperature
  • The original HID or SON lamp wattage
  • Whether existing control gear must be bypassed
  • Whether the fitting is enclosed or ventilated
  • The product-specific installation instructions

Wattage Is Not a Direct Comparison

An LED lamp normally uses fewer watts than the discharge lamp it replaces, so wattage should not be treated as the only measure of suitability. Compare the lumen output and application of the original lamp with the specification of the proposed Bell LED replacement.

Physical compatibility is equally important. Specialist LED replacements may differ in length, diameter and light distribution from older HID lamps, even when they use the same cap.

Control Gear and Installation

Traditional HID and SON fittings commonly contain ballasts, ignitors or other control gear. Depending on the selected LED lamp, this equipment may need to be removed or bypassed. Always follow the instructions supplied with the individual product and use a suitably qualified electrician where wiring alterations are required.

Bell LED HID and SON Replacement FAQs

Can an LED lamp directly replace a SON lamp?

Only when the LED lamp, fitting and installation method are compatible. Check the cap, dimensions, lumen output and control gear requirements before making the change.

Can Bell LED lamps replace metal halide lamps?

Selected Bell LED lamps are designed as alternatives to compatible metal halide products. Match the application and required light output rather than relying solely on the original wattage.

Does the existing ballast need to be removed?

This depends on the individual lamp. Some LED alternatives require direct mains operation and the old ballast or ignitor to be bypassed. Follow the product instructions carefully.

How do I choose the correct LED replacement?

Check the existing lamp code, cap, dimensions, wattage, lumen output and colour temperature. You should also confirm the fitting type and whether its control gear is compatible.